Call Us: 9099977543 / 44 / 45

UPVC Pipes & Fittings

“Redefined steel concept in plastic.”

  • Home
  • Upvc Pipes & Fittings

“KANTAM” UPVC Pipes & Fittings

Kantam uPVC (white ) Plumbing pipes Fittings are truly “Redefined steel concept in plastic.” That’s whay is is Best n ideal for portable water system.

Kantam Plumbing pipes and fittings has excellent physical, Michenical & chemical Properties. Because of its lower Density ( Approx 1.43 g/cm3) its weight is 1/6th of the cast iron & steel, Which makes it cheaper to transport and easy to install.

Kantam upvc plumbing pipes and fittings are manufactured As per Astm-D 1785 and ASTM-D 2467, sch. 40 & 80.

Features & Benefits

  • Light Weight :- Easy to transport and install
  • Solvent cement joint :- secured threads ensure the leak proof joints
  • Smooth Bore :- optimum flow rates
  • Corrosion resistance :- Superior resistance to harsh wearher conditions
  • Low maintenance : - superior Resistance to most of the chemical, no scaling, makes the system almost Maintenance free
  • Life:- strong and longer lasting
  • Cost-effective:- Cheaper then Metal pipes

Application

  • Cold water plumbing application in building
  • Swimming pools
  • Salt water lines
  • Aggressive/corrosive fluid transportation
  • Industries like Sugar, paper and etc.
  • Dye plants, chrome, zinc platting, tanning industry and textile process house

Electrical Properties

UPVC
Dielectric constant 0.02@106Hz
Power Factor 1013-1014 ohm
Surface resistivity 2000 volts/mm

Thermal Properties

UPVC
Max continuous service temp 60 degree C
Coeff. of Thermal Expansion 6.4 X 10^-5 mm/mm/dC
Vicat. Softening Temprature 80 degree C (BS2782)

Mechanical Properties

UPVC
Density 1.43 - 1.50 g/cm^3
Ultimate tensile strength 45Mpa
Shear strength 39Mpa
Hardness (Shore) 85(ASTM D2240)
Elongation at break 50 - 80%

Dimension of ASTM Heavy Pressure U-PVC Pipes at 23^C as per ASTM D-1785

Schedule 40 Schedule 80
Size Outside Diameter Wall Thickness Working Pressure Burst Pressure Wall Thickness Working Pressure Burst Pressure Thread per inch Thread Length
(inch) (mm) (mm) (MPa) (MPa) (mm) (MPa) (MPa) (Nos.) (+-2mm)
1/2 21.34 2.77+0.51 4.14 13.17 3.73+0.51 5.86 18.76 14 15.00
3/4 26.67 2.87+0.51 3.31 10.62 3.91+0.51 4.76 15.17 14 16.50
1 33.40 3.38+0.51 3.10 9.93 4.55+0.53 4.34 13.93 11 19.00
1.25 42.16 3.56+0.51 2.55 8.14 4.85+0.58 3.59 11.45 11 22.00
1.5 48.26 3.68+0.51 2.28 7.31 5.08+0.61 3.24 10.41 11 22.00
2 60.32 3.91+0.51 1.93 6.14 5.54+0.66 2.76 8.89 11 30.00
2.5 73.02 5.16+0.61 2.07 6.69 7.01+0.84 2.90 9.38 11 32.00
3 88.90 5.49+0.66 1.79 5.79 7.62+0.91 2.55 8.27 11 35.00
4 114.30 6.02+0.71 1.52 4.90 8.56+1.02 2.21 7.71 11 42.00
About

“Kantam” was found in 1980 and has been continually growing since then. “Kantam” is pioneer of pvc fabricated fitting in India. Beginning with modest plastic pipe fabricator. In 1985 Kantam went on to produce ISI foot valves, gate valves & threaded pipes & fittings.

Contact Us
  • Address: 85-90, Shivshakti Estate, V-Trans Lane, Narol Cross Road, Narol, Ahmedabad, Gujarat, India - 382405
  • Phone: (079) 2573 3955
  • Mobile: 9099977543 / 44 / 45
  • Email: kantam_valves@yahoo.co.in
Designed By : © 2014. Kantam Plast. All right reserved.