Call Us: 9099977543 / 44 / 45

Rigid Pipes & Fittings

“Redefined steel concept in plastic.”

  • Home
  • Rigid Pipes & Fittings

Range

In a short span of time KANTAM has produced the largest range and sizes of injection moulded PVC fittings in the country. The fittings, are made from the highest grade quality resin. PVC fittings ensure easy installation, quick modifications as well as complete flexibility in constructing a piping system.

Kantam Rigid uPVC pipes are available in size of 20 to 400 mm and pressure rating of Class 1 to Class 6 (0.25Mpa2, 2.5 Kgf/cm2 to 1.25Mpa2, 12.5 Kgf/cm2) confirming to IS 4985 : 2000 as per application requirement.

Application

Kisan Rigid uPVC Plain / Socketed / Firmseal pipes are used for various applications, some of its agricultural and allied applications are:

  • Irrigation Scheme
  • Tube Well
  • Bio Gas Plant
  • Rainwater
  • Drinking water supply lines
  • Main line for sprinklers / drip irrigation
  • Underground or open pipeline
  • Telecommunication cable ducting

Features

  • Corrosion Resistant : Immune to galvanic or electrolytic erosion
  • Chemical and Biological Resistant: Resistant to acids, oxidizing agents, alkalis, oils and domestic effluents. Fit for high purity water applications
  • Easy Installation : Pipes of diameter less than 140 mm can be joined by hand pressure while for those of a larger diameter, a pipe jack is adequate
  • Lower cost of Installation : Lightweight therefore they are easy to transport and carry to the site
  • Flexibility :Can accommodate slight shifting of the soil, bending of the pipe up to 2 degrees per joint and tolerates small gradients in underground piping
  • Immediate Testing: Pipes can be tested for ability to withstand pressure immediately on completion of installation. There is no need to wait for the joints to dry, etc.
  • Maintenance Free : No painting or coating required
Specification
Nominal Outside Diameter (nominal size)(mm.) Mean Outside Diameter (mm.) Outside Diameter at any point (mm.)

Working Pressure / Wall thickness

Class 1 0.25 Mpa2 2.5 kgf/cm2 Class 2 0.40 Mpa2 4.0 kgf/cm2 Class 3 0.60 Mpa2 6.0 kgf/cm2 Class 4 0.80 Mpa2 8.0 kgf/cm2 Class 5 1.00 Mpa2 10.0 kgf/cm2 Class 6 1.25 Mpa2 12.5 kgf/cm2
Min-Max Min-Max Min-Max Min-Max Min-Max Min-Max Min-Max Min-Max
20 20.0-20.3 19.5-20.5 - - - - 1.1-1.5 1.4-1.8
25 25.0-25.0 24.5-25.5 - - - 1.2-1.6 1.4-1.8 1.7-2.1
32 32.0-32.3 31.5-32.5 - - - 1.5-1.9 1.8-2.2 2.2-2.7
40 40.0-40.3 39.5-40.5 - - 1.4-1.8 1.8-2.2 2.2-2.7 2.8-3.3
50 50.0-50.3 49.4-50.6 - - 1.7-2.1 2.3-2.8 2.8-3.3 3.4-4.0
63 63.0-63.3 62.2-63.8 - 1.5-1.9 2.2-2.7 2.8-3.3 3.5-4.1 4.3-5.0
75 75.0-75.3 74.1-75.9 - 1.8-2.2 2.6-3.1 3.4-4.0 4.2-4.9 5.1-5.9
90 90.0-90.3 88.9-91.1 1.3-1.7 2.1-2.6 3.1-3.7 4.0-4.6 5.0-5.7 6.1-7.1
110 110.0-110.4 108.6-111.4 1.6-2.0 2.5-3.0 3.7-4.3 4.9-5.6 6.1-7.1 7.5-8.7
125 125.0-125.4 123.5-126.5 1.8-2.2 2.9-3.4 4.3-5.0 4.9-5.6 6.9-8.0 8.5-9.8
140 140.0-140.5 138.3-141.7 2.0-2.4 3.2-3.8 4.8-5.5 6.3-7.3 7.7-8.9 9.5-11.0
160 160.0-160.5 158.0-162.0 2.3-2.8 3.7-4.3 5.4-6.2 7.2-8.3 8.8-10.2 10.9-12.6
180 180.0-180.6 177.8-182.2 2.6-3.1 4.2-4.9 6.1-7.1 8.0-9.2 9.9-11.4 12.2-14.1
200 200.0-200.6 197.6-202.4 2.9-3.4 4.6-5.3 6.8-7.9 8.9-10.3 11.0-12.7 13.6-15.7
225 225.0-225.7 222.3-227.7 3.3-3.9 5.2-6.0 7.6-8.8 10.0-11.5 12.4-14.3 15.3-17.6
250 250.0-250.8 247.0-253.0 3.6-4.2 5.7-6.5 8.5-9.8 11.2-12.9 13.8-15.9 17.0-19.6
280 280.0-280.9 276.6-283.4 4.1-4.8 6.4-7.4 9.5-11.0 12.5-14.4 15.4-17.6 19.0-21.9
315 315.0-316.0 311.2-318.8 4.6-5.3 7.2-8.3 10.7-12.4 14.0-16.1 17.3-19.9 21.4-24.7
355 355.0-356.1 350.7-359.3 5.1-5.9 8.1-9.4 12.0-13.8 15.8-18.2 19.6-22.6 24.1-27.8
400 400.0-401.2 395.2-404.8 5.8-6.7 9.1-10.5 13.5-15.6 17.8-20.5 22.0-25.3 27.2-31.3
About

“Kantam” was found in 1980 and has been continually growing since then. “Kantam” is pioneer of pvc fabricated fitting in India. Beginning with modest plastic pipe fabricator. In 1985 Kantam went on to produce ISI foot valves, gate valves & threaded pipes & fittings.

Contact Us
  • Address: 85-90, Shivshakti Estate, V-Trans Lane, Narol Cross Road, Narol, Ahmedabad, Gujarat, India - 382405
  • Phone: (079) 2573 3955
  • Mobile: 9099977543 / 44 / 45
  • Email: kantam_valves@yahoo.co.in
Designed By : © 2014. Kantam Plast. All right reserved.